Here are some key considerations for a DiSEqC signal multiswitch with a "4 in 1 out" configuration:

1. DiSEqC Protocol: Ensure that the multiswitch supports the DiSEqC (Digital Satellite Equipment Control) protocol, which allows satellite receivers to send commands to the multiswitch to select the desired satellite signal.
2. Signal Quality: Look for a multiswitch that provides good signal quality with low signal loss and proper signal isolation between output ports. Maintaining signal quality is essential for optimal TV reception.
3. Frequency Range: Verify that the multiswitch covers the frequency range used by your satellite TV system, which typically falls within the standard satellite frequency range (e.g., 950MHz to 2150MHz).
4. Construction: Check the build quality of the multiswitch to ensure durability and resistance to environmental conditions.
5. Compatibility: Confirm that the multiswitch is compatible with your specific satellite TV system, including your satellite dishes, LNBs, and satellite receivers.